CleanBoard Tiny Kit

(2 customer reviews)

From 13.68

  • PLN: zł 59.00 - zł 117.00

Charge 1-6 1s lipo at the same time

Easy Storage mode for your LiPo

Plug discharged and charged lipo together safely – series charging board.

Choose LiPo quantity with a jumper

Compatible with PH 2.0 & BT 2.0 (not included)

SKU: 999 Category: Tags: , ,

Description

1s lipo Serial Charging Board with Storage function

Storage 1s lipo charging board – CleanBoard Tiny

It’s not easy to storage 1s lipo. Most of 1s lipo chargers doesn’t have that function. This tiny whoop board lets you storage and charge 1-6 1s Lipo at the same time. It uses serial charging, so it is safe to plug in discharged and charged batteries together too!

CleanBoard-Tiny-best-series-1s-lipo-charging-board-with 450mah

New shipment:
– Bigger xt60 cable soldering pads for easier soldering
– Bigger balance cable soldering pads. You guessed, easier soldering
– Cold-white PCB for the CleanBuild Style 🙂

Need advice on 1s LiPo charging solutions? Check this post:
Charging 1s LiPo Solutions 

CleanBoard Tiny storage 1s lipo charging board

Combines pluses of all different 1s charging solutions:
– Jumper lets you choose how many 1s batteries (1-6) you need to charge, storage or discharge
– You are using your RC charger that you probably already have. It is as super accurate as your charger so no overcharging fire hazard
– Charge, Storage or discharge 1s LiPo as you like. LiPo, LiHv? No problem!
– Safely plug charged and discharged batteries together. It is Serial (instead of parallel) charging, so you do not have to check the state of charge before plugging in.

CleanBoard-Tiny-best-series-1s-lipo-charging-board-small

Works as 1s LiPo Discharger too

Because You plug CleanBoard Tiny to your RC LiPo Charger, you can use this 1s charge board as a 1s LiPo discharger too. It is as easy as plugging in Lipo, setting number of LiPo Packs with pinheaded and set Your RC Charger to discharge.

Ever had to stop flying Tiny Whoop with fully charged batteries? Afraid that it will shorten 1s packs lifespan? Just use CleanBoard Tiny. Thanks to being serial 1s charging board (not parallel) you can plug fully charged and discharged batteries together. It is safe with CleanBoard Tiny! Not set to discharge or storage and Your charger will do the rest.

CleanBoard Tiny Kit Soldering Tips: 

CleanBoard Tiny Soldering Tips

Kit consists of:

CleanBoard-Tiny-best-series-1s-lipo-charging-board-kit

1x CleanBoard Tiny PCB
6x PH 2.0 connector
1x 6s 10 cm Balancer port connector
2x 16awg (xt60) cable
1x xt60 plug
1x Pin-header and Jumper

You will need:

– Soldering kit (soldering Ion, Soldering Paste, solder etc.)
– Really basic soldering skills (Soldering tutorial)
– Heatshring (dia: 4-5mm, about 1cm long)
Optional: BT 2.0 connectors (not included)
– Optional: Something to protect bottom PCB side against short circuit (tape, liquid tape, 3D print)

Or just buy a laser cut 3mm Protective Foam:

Tiny Protective FoamCleanBoard-tiny-foam-bottom-2

Polish:

Storage 1s lipo charging board – CleanBoard Tiny

Nowa dostawa.

CleanBoard-Tiny-best-series-1s-lipo-charging-board-features

Kosmetyczne zmiany, które pomogą jeszcze łatwiej i szybciej lutować CleanBoard Tiny kit
– wygodniejsze pady do lutowania kabla xt60
– Większe pady lutowania kabli balansera
– Białe PCB – the CleanBuild style 😉

Co potrafi CeanBoard Tiny

Dzięki zworce sam wybierasz ile baterii chcesz naładować, lub rozładować.
Dzięki temu że wpinasz ją do ładowarki RC, ładowanie jest tak dokładne jak twoja ładowarka. Nie przeładuje, lub nie doładuje ich za mało.
Dodatkowo możesz skorzystać z takiego trybu ja ci się podoba. LiPo? LiPo HV? A może storage na 3.9V? Ograniczają Cię tylko możliwości twojej ładowarki.
Dzięki temu że jest to płytka ładowania seryjnego (a nie równoległego), możesz bezpiecznie wpiąć naraz całkiem rozładowaną i całkiem naładowaną baterię!

CleanBoard-Tiny-best-series-1s-lipo-charging-board-with 450mah

W skład zestawu wchodzi wszystko co potrzebne do złożenia płytki:

CleanBoard-Tiny-best-series-1s-lipo-charging-board-kit

1x CleanBoard Tiny PCB
6x Złącze PH 2.0 (solid pin)
1x kabel Balansera ok. 10cm
2x kabel 16 awg ok. 10cm
1x XT60
1x 6×2 Pinheader i zworka do Pinheader’a

Potrzebujesz:

– Zestaw do lutowania
– Kawałek Termokurczy
– Opcjonalnie: Złącza BetaFPV
– Opcjonalnie: Coś do zabezpieczenia dołu płytki przed zwarciem (taśma izolacyjna/druk 3d/Epoksy itd)

Lub kup gotową piankę, wyciętą specjalnie to CleanBoard Tiny:

Tiny Protective FoamCleanBoard-tiny-foam-bottom-2

Additional information

Kit

Solder my self, Solder it for me

Add Protective Foam

No, Yes +4PLN

2 reviews for CleanBoard Tiny Kit

  1. Rafał

    Finally I can storage my 1s packs 🙂

  2. Heike

    What’s up colleagues, how is the whole thing, and what you wish for to say concerning this
    post, in my view its actually amazing for me.

Add a review

You may also like…